1-888-BRAUSSE
 
Brausse Diecutting and Creasing Machine

•New style feeder head for accurate feeding of various types and even difficult stock, all adjustments can be made on the run.

• Non-stop feeder with motorized side shift and non-stop delivery with counter and tape inserter to ensure continuous productivity.• The slow down device on feed board allows sheet to enter head stopper at a greatly reduced speed to ensure excellent register when running thinner weight stock.

• Microprocessor assisted monitoring and self-diagnosis system for safe operation and easymaintenance. Control system with LCD screen display provides information of each section to facilitate operation and trouble shooting.

• Triple action stripping station with gripper edge removal device further enhances productivity.

• The slow down brush and double air bar system at delivery can all be adjusted on the run, and all can be turned off and on while the machine is in 'RUN' mode; the sheet push down device on 1300SE ensures proper stacking of larger sheets.
• Large digital display for left and right head stops adjustment.

• Pneumatic chase locking system to eliminate moving mechanical parts.

• The side guide angle adjustment ensures a perfect 90º angle between the side guide and front lays at all time.

• A special gripper bar leveling device at cutting station is used to ensure that the gripper bar willbe held perfectly level while the sheets are in the cutting station.



 Max. sheet size 1050 x 750 mm 1450 x 1100mm
41 1/8" x 29 1/2" 57" x 43 1/4"
 Min. sheet size 400 x 370 mm 700 x 500 mm
15 3/4" x 14 1/2" 27 1/2" x 19 3/4"
 Max. cutting size 1041 x 730 mm 1420 x 1080 mm
41" x 28 3/4" 56" x 42 1/2"
 Min. gripper margin 9 mm 10 mm
23/64" 25/64"
 Inner chase size 1145" x 755 mm 1480 x 1106 mm
45 x 29 3/4" 58 1/4" x 43 1/2"
 Size of cutting plate 1080 x 736 mm 1472 x 1086 mm
42 1/2" x 29 3/8" 58" x 42 1/4"
 Stock range 0.1 - 2 mm cardboard 0.2 - 2 mm
0.0039" - 0.078" 0.008" - 0.078"
corrugated 0.7 - 4.5mm
0.028" - 0.18"
 Max. pressure 300 tons 400 tons
 Max. mechanical speed 7,500 cycles/hour 5,500 cycles/hour
 Main motor 11 kw (29 Amp) 22 kw (58 Amp)
 Other power required 9 kw (24 Amp) 14 kw (36 Amp)
 Overall length 7018 mm (23') 9880 (32'5")
 Overall width 4189 mm (13' 9") 5270 mm (17' ")
 Overall height 2045 mm (6'8") 2580 mm (8'5")
 Total weight 15.5 tons 28 tons

In the interest of product improvement, the manufacturer reserves the right to change specifications and features without notice.
Hardened aluminum alloy feeding rollers ensure runningthinner stock at higher speed
Non-stop delivery with tape inserter
Triple action
stripping station.
Non-stop feeder with pre-loading device, also taking pallet right off the press
Control system with LCD screen display

Copyright © 2001-2011 Brausse Group. All Rights Reserved.